SLIDE FIRE SOLUTIONS
Includes:SSAR-15 Rifle Stock,Interface Block,Hex Key,Instructions and BATFE Approval Letter.
Slide Fire Solutions’ground breaking “Slide Stock”technology and ergonomic design provide the ability to Slide Fire safely –offering a new element of entertainment for recreational shooters everywhere!
Applying principles that have been used for over 40 years to Bump Fire –this new radical design enables the operator to shoot as quickly as desired without compromising their own safety or the safety of others around them. Unlike when traditionally bump firing;the SSAR-15 allows the shooter to firmly hold their rifle and maintain complete control at all times. In addition,as a result of the shooter pushing forward to discharge each round,the operator is able to correct their point-of-aim for each shot and prevent recoil from pushing the firearm’s muzzle upward in an unsafe direction.
In principal the SSAR-15 functions similar to the Gatlin system. When operating the Gatlin system the shooter operated a crank in a circular motion to discharge a round. Every 1/5 of a rotation a round would be fired –the shooter would then have to continue forward another 1/5 of a rotation to fire the next round,and so on…. With the SSAR-15;the operator moves the upper assembly forward to discharge a round. To discharge the next round the operator must again move the upper assembly forward. Just like with the Gatlin system;a rifle equipped with the SSAR-15 will never fire automatically.
MADE IN THE USA
>Available in Right and Left Hand Models
>Winter Trigger Guards and some Sling Plates may not be compatible
>SFS recommends installation of Complete Kit be performed by a qualified gunsmith
Note:
The SSAR-15 is NOT a mechanical device. It does not perform any automatic functions,and does not increase a rifles rate of fire.
The SSAR-15 is a rifle stock. It requires the shooter to activate the firing mechanism for each and every round that is fired.
At any time - if the shooter fails to apply forward pressure to move the firearm back into the firing condition - the firearm will not fire.
This is for a Group Pre-order. When we have reached a total of 18 orders for the Slide Fire Units the order will be placed with the distributor. See our Pre-Order terms for full details. If you would like to receive an invoice before you pay,simply contact us and we will send you one.
You may pay for your Slide Fire stock with Zash Pay or you may send a personal check or money order to:
Liberty Guns And Armor
1776 Dove Dr.
Quinlan,TX 75474
Available Qty:18
Slide Fire Solutions now offers a kit with all the parts AND tools necessary to install the SSAR-15 on an AR-15 rifle with an A2 fixed stock. No more looking around trying to find the parts or wondering what tools are needed. The “Complete Kit”comes with everything listed below:
SSAR-15 Rifle Stock,Interface Bock,Mil-Spec 6-Position Buffer Tube,Castle Nut,H2 Buffer,Carbine Buffer Spring,End Plate,Hex Key,Spanner Wrench,Instructions,and BATFE Approval Letter.
Slide Fire Solutions’ground breaking “Slide Stock”technology and ergonomic design provide the ability to Slide Fire safely –offering a new element of entertainment for recreational shooters everywhere!
Applying principles that have been used for over 40 years to Bump Fire –this new radical design enables the operator to shoot as quickly as desired without compromising their own safety or the safety of others around them. Unlike when traditionally bump firing;the SSAR-15 allows the shooter to firmly hold their rifle and maintain complete control at all times. In addition,as a result of the shooter pushing forward to discharge each round,the operator is able to correct their point-of-aim for each shot and prevent recoil from pushing the firearm’s muzzle upward in an unsafe direction.
In principal the SSAR-15 functions similar to the Gatlin system. When operating the Gatlin system the shooter operated a crank in a circular motion to discharge a round. Every 1/5 of a rotation a round would be fired –the shooter would then have to continue forward another 1/5 of a rotation to fire the next round,and so on…. With the SSAR-15;the operator moves the upper assembly forward to discharge a round. To discharge the next round the operator must again move the upper assembly forward. Just like with the Gatlin system;a rifle equipped with the SSAR-15 will never fire automatically.
MADE IN THE USA
>Available in Right and Left Hand Models
>Winter Trigger Guards and some Sling Plates may not be compatible
>SFS recommends installation of Complete Kit be performed by a qualified gunsmith
Note:
The SSAR-15 is NOT a mechanical device. It does not perform any automatic functions,and does not increase a rifles rate of fire.
The SSAR-15 is a rifle stock. It requires the shooter to activate the firing mechanism for each and every round that is fired.
At any time - if the shooter fails to apply forward pressure to move the firearm back into the firing condition - the firearm will not fire.
This is for a Group Pre-order. When we have reached a total of 18 orders for the Slide Fire Units the order will be placed with the distributor. See our Pre-Order terms for full details. If you would like to receive an invoice before you pay,simply contact us and we will send you one.
You may pay for your Slide Fire stock with Zash Pay or you may send a personal check or money order to:
Liberty Guns And Armor
1776 Dove Dr.
Quinlan,TX 75474
Available Qty:18
Ammo Cases
Holsters,Optics,Stocks,etc.
Fully tanned leather for comfortable concealed carry. Real panel gives appearance of a wallet to hide the shape of the gun.
Technical Data
Fully tanned leather-for comfortable concealed carry.
Real panel gives appearance of a wallet to hide the shape of the gun.
Perfectly legal and easy to use.
Ease one handed release.
Available Qty:1
Available Qty:1
Available Qty:1
Available Qty:1
Available Qty:2
Available Qty:1
Safety
Available Qty:2
Cleaning Supplies
Available Qty:1
Magazines
Available Qty:2
Available Qty:3
Available Qty:1
